10 Tips For Water Damage Repair

water damage repair
water damage repair

Photo By: TheDigitalArtist : Pixabay

 

Water is something that we need to survive. However, not all water is good and wanted. When water gets into your home, it can damage your possessions and your home. The quicker you take care of water damage, the better results you will have. In some cases, furniture and even carpet can be saved. Dealing with water quickly is just one tip when it comes to water damage repair. The following ten tips will help you deal with water damage repair.

Know the Type of Water

The first thing you want to establish is the type of water. There are three different types of water. The first type is clean water. Clean water comes from condensation, leaky pipes, and rain. The second type is grey water. Grey water comes from toilets, washing machines, and dishwashers. This type of water is slightly dirty and easy to clean up with the right type of gear. The third type of water is blackwater. Blackwater comes from sewage and nearby flooding of rivers or ponds. You should have a professional deal with black water as it is dangerous and can cause illnesses.

Turn Off Electricity

Before you walk into the flooded area, you will want to turn off the electricity to that area. After the electricity has been turned off, you will want to remove all electronics. Turning off the electricity and removing electronics minimizing the chances of you getting electrocuted.

Inspect for Mold

Inspect the area for any serious issues. A common issue with standing water in your home is mold and mildew. If you find mold, you need to identify how severe it is. For small areas, you can remove the materials, bag them, and throw them out. For more severe cases of mold, you will want to call the professionals.

Dry Out Area

It is imperative to dry out the area as quickly as possible. Removing the water will reduce the amount of damage. For large areas, you will want to use large fans to circulate the air flow.

Remove and Toss Out Damage Materials

You will want to toss out any porous materials. Porous materials such as carpet, insulation, and fabric will absorb the moisture and cause mildew to grow. It is best to remove and toss these items out as quickly as possible.

Disinfect the Area

After removing all porous materials, you will want to disinfect the area. You will want to use a cleaner that will rid the area of bacteria. Any bacteria that is left behind can cause issues later.

Focus on Ceiling Damage First

Due to gravity, ceiling damage is the most dangerous. You will want to remove any panels or areas first. If the leak is coming from the roof, you will want to find the where on the roof the problem is. The problem could be deeper than you think.

Replace Wood

You will want to replace any damaged wood. This means any wood that is warped or has mold or mildew. After removing the wood, you will want to make sure you thoroughly clean underneath to get rid of any bacteria.

Replace Drywall

You do not always have to replace the whole drywall. If the drywall hasn’t swelled or sagged 3/8 of an inch or more, then you do not have to replace all of it. All you need to do is cut out the damaged area and replace it.

Call the Professionals

Dealing with water damage is not easy, and it is the last thing you want to deal with. Instead of doing all the work just call the professionals at Get Me Dry Today.